Biocomposite Bridge

  • David Malschaert The Netherlands, The Hague University of Applied Sciences, Civil Engineering, Antea Group B.V
Keywords: Biocomposite, Biofibre, Bioresin, Biobridge, Biobased structural application

Abstract

Biocomposite materials are becoming more interesting to use in infrastructural projects due to their biodegradable, renewable, recyclable and sustainable properties. With a relatively low density, it is an interesting building material regarding a bridge deck. When designing with biocomposite the following factors are important to consider: material design, fibre treatment, coating and manufacturing technique. A PLA-Bamboo biocomposite was applied to an existing design of a bridge deck made out of synthetic composite. Due to its randomly oriented fibres and its equally designed lamellae, the cross section was considered homogeneous and the stresses were calculated according to ‘Hooke’s law’. The unity checks were performed according to ‘CUR 96’ with an own devised material factor of 5,69. This factor was calculated in this study for biocomposites with untreated fibres. The calculations showed that the original material (synthetic composite) was not directly replaceable by the PLA-Bamboo biocomposite. An alternative design of the deck (deck height of 1 meter and doubled thicknesses of the skins and web plates, 40- and 10 mm) showed better results. This design complied for the unity checks for strength.

References

Akil, H., Omar, M. F., Mazuki, A. A. M., Safiee, S. Z. A. M., Ishak, Z. M., & Bakar, A. A. (2011). Kenaf fiber reinforced composites: A review. Materials & Design, 32(8), 4107-4121.

Anderson, T. (2005). Fracture Mechanics - Fundamentals and Applications. Boca Raton: Taylor & Francis Group.

CUR. (2003). Aanbeveling 96, Vezelversterkte Kunststoffen in Civiele Draagconstructies. CUR.

Facca, A. G., Kortschot, M. T., & Yan, N. (2006). Predicting the elastic modulus of natural fibre reinforced thermoplastics. Composites Part A: Applied Science and Manufacturing, 37(10), 1660-1671.

Facca, A. G., Kortschot, M. T., & Yan, N. (2007). Predicting the tensile strength of natural fibre reinforced thermoplastics. Composites Science and Technology, 67(11), 2454-2466.

Faruk, O., Bledzki, A. K., Fink, H. P., & Sain, M. (2012). Biocomposites reinforced with natural fibers: 2000–2010. Progress in polymer science, 37(11), 1552-1596.

Gent, U. O. (2014). Organizing your composite workshop. Retrieved from University of Gent: http://www.composites.ugent.be/home_made_composites/organizing_your_composite_workshop.html

Graupner, N., Herrmann, A. S., & Müssig, J. (2009). Natural and man-made cellulose fibre-reinforced poly (lactic acid)(PLA) composites: An overview about mechanical characteristics and application areas. Composites Part A: Applied Science and Manufacturing, 40(6), 810-821.

Heester, B. (2015). Definitief ontwerp. Brug over de Kleine Dommel te Eindhoven. Antea Group.

Kalia, S., Kaith, B. S., & Kaur, I. (2009). Pretreatments of natural fibers and their application as reinforcing material in polymer composites—a review. Polymer Engineering & Science, 49(7), 1253-1272.

Mohanty, A. K., Misra, M., & Hinrichsen, G. (2000). Biofibers, biodegradable polymers and biocomposites: an overview. Macromolecular materials and Engineering, 276(1), 1-24.

Nijssen, R. (2015). Composieten Basiskennis. Vereniging kunstofcomposieten Nederland.

Ochi, S. (2008). Mechanical properties of kenaf fibers and kenaf/PLA composites. Mechanics of materials, 40(4), 446-452.

Satyanarayana, K. G., Arizaga, G. G., & Wypych, F. (2009). Biodegradable composites based on lignocellulosic fibers—An overview. Progress in polymer science, 34(9), 982-1021.

Shalwan, A., & Yousif, B. F. (2013). In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres. Materials & Design, 48, 14-24.

Shin, F. G., Xian, X. J., Zheng, W. P., & Yipp, M. W. (1989). Analyses of the mechanical properties and microstructure of bamboo-epoxy composites. Journal of Materials Science, 24(10), 3483-3490.

Singh, B., Gupta, M., & Verma, A. (2000). The durability of jute fibre-reinforced phenolic composites. Composites Science and Technology, 60(4), 581-589.

Welleman, J., Dolfing, A., & Hartman, J. (2011). Basisboek Toegepaste Mechanica. Amersfoort: Thieme Meulenhoff.

Published
2017-08-27
How to Cite
Malschaert, D. (2017). Biocomposite Bridge. Journal of Building Materials and Structures, 4(1), 22-30. https://doi.org/10.34118/jbms.v4i1.28
Section
Original Articles