Revolutionizing Rigid Pavements Towards Magnetizable Concrete Materials for Charging Electric Vehicles

  • Mohamed Abdel Raouf Ball State University, Department of Construction Management and Interior Design, 2000 W. University Avenue, Muncie, IN 47306, USA.
  • Yassien Zidan The American University in Cairo, Department of Construction Engineering and Management, AUC Avenue, New Cairo 11835, Egypt.
  • Hana Alnaas The American University in Cairo, Department of Construction Engineering and Management, AUC Avenue, New Cairo 11835, Egypt.
  • Rand Abo ElEnain The American University in Cairo, Department of Construction Engineering and Management, AUC Avenue, New Cairo 11835, Egypt.
  • Abdullah Mahmoud The American University in Cairo, Department of Construction Engineering and Management, AUC Avenue, New Cairo 11835, Egypt.
  • Mahmoud Seddik The American University in Cairo, Department of Construction Engineering and Management, AUC Avenue, New Cairo 11835, Egypt.
  • Mayar Mohamed Khairy The American University in Cairo, Department of Construction Engineering and Management, AUC Avenue, New Cairo 11835, Egypt.
  • Mohamed Nagib Abou-Zeid The American University in Cairo, Department of Construction Engineering and Management, AUC Avenue, New Cairo 11835, Egypt.
Keywords: Magnetizable Concrete, eRoads, Smart Pavements, Recyclable Materials

Abstract

Nowadays, the green economy dictates the urge for finding innovative construction materials to be compatible with the future needs. The growing potential of electric vehicles (EVs) necessitates the transformation towards sustainable and magnetizable concrete pavement. The primary objectives of this work are to determine the optimal materials and mixing proportions to produce high-performance magnetizable mortars for pavement applications. The experimental testing program includes assessing the magnetic properties through the inductance test, the fresh properties using the mini-slump test, the hardened properties through the compressive strength at 3, 7, and 28 days, and the durability through chemical soundness and abrasion resistance. It may be concluded that the magnetic properties of Portland cement mortars can be enhanced through the incorporation of natural magnetite (25% replacement), slag (25% replacement), and scrap iron fillings (70% replacement), and importantly, the addition of enhancers such as magnets, steel mesh, and/or steel bars. These magnetizable mortars can be used for rigid pavement applications since they have a higher abrasion resistance.

References

ASTM International. (2020). ASTM C1437-20: Standard Test Method for Flow of Hydraulic Cement Mortar. West Conshohocken, PA: ASTM International.

ASTM International. (2020). ASTM C267-20: Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes. West Conshohocken, PA: ASTM International.

ASTM International. (2022). ASTM A772/A772M-00(2022): Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current. West Conshohocken, PA: ASTM International.

ASTM International. (2023). ASTM C1803/C1803M-23: Standard Guide for Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser. West Conshohocken, PA: ASTM International.

ASTM International. (2024). ASTM C109/C109M-24: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens). ASTM International.

Bhagyashree, Panda, F. M. Rad, and M.S.Rajabi. (2023). Wireless Charing of Electric Vehicles Through Pavements: System, Design and Technology. Handbook of Smart Energy SystemsEconPapers.

Car and Driver. (2017). "BMW, Benz Hold Hands on Wireless Charging, Will Head to S-Class, i Cars." Car and Driver. Accessed January 15, 2025. https://www.caranddriver.com/news/a15362624/bmw-benz-hold-hands-on-wireless-charging-will-head-to-s-class-i-cars.

G.K. Glass, N.R. Buenfeld (2000). "The influence of chloride binding on the chloride induced corrosion risk in reinforced concrete." Corrosion Science 42, pages 329–344, https://doi.org/10.1016/S0010-938X(99)00083-9.

Hardman, S., Fleming, K. L., Khare, E., & Ramadan, M. M. (2021). A perspective on equity in the transition to electric vehicle. MIT Science Policy Review 2, 46-54.

International Energy Agency. Global EV Outlook 2023: Trends in Electric Vehicle Markets and Implications for Road Transport. https://www.iea.org.

Reza Tavakoli, A. Echols, U. Pratik, Zeljko Pantic. Fray Pozo, Amir Malakooti, Marc Maguire. (2017). Magnetizable Concrete Composite Materials for Road-Embedded Wireless Power Transfer Pads. IEEE

S.W. Tang, Y. Yao, C. Andrade, Z.J. Li (2015). "Recent durability studies on concrete structure". Cement Concrete Res. 78, pages 143–154, https://doi.org/10.1016/J.CEMCONRES.2015.05.021.

Schneider, K. Kamichi, D. Mikat, R. Sutton, M. Abdul-Hak, Y. Minagawa, H. Abeta, et al. (2018). “Bench testing validation of wireless power transfer up to 7.7kW based on SAE J2954.” SAE International Journal Passenger Cars Electron. Electr. Syst. 11(2), 89–108.

Seixas Esteves, David. Joao Manuel da Fernandes Silva, Joana Diniz Fonseca, José Joaquim Poças Gonçalves, Filipe da Cerqueira Silva, Angela Maria de Jesus Sequeira Serra Nunes, Vitor Manuel Aires Vermelhudo, Diana Lara Matos Ferreira Tavares Correia, Joao Pedro Monteiro Serafim, (2022). “Modified Mortar for Wireless Powered Lighting Systems.” Structural Concrete.

Soares, H. Wang. (2022). “A study on renewed perspectives of electrified road for wireless power transfer of electric vehicles”. Renewable Sustainable Energy Rev. 158, 112110.

Tiemann, Myrel, Markus Clemens, and Benedikt Schmuelling. (2020). “Comparison of Conventional and Magnetizable Concrete Core Designs in Wireless Power Transfer for Electric Vehicles.” 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer, November 15-19, Seoul, Korea.

Yaowen, Pei, Feng Chen, Tao MA, Peng Peng, Gonghui, Yuxuan Ji (2023). “Towards a Novel Magnetic Asphalt Mixture Containing Ceramic Ferrites for Intelligently Encoding Road Traffic Sign Information.” Construction and Building Materials.

Published
2025-06-30
How to Cite
Abdel Raouf, M., Zidan, Y., Alnaas, H., Abo ElEnain, R., Mahmoud, A., Seddik, M., Mohamed Khairy, M., & Nagib Abou-Zeid, M. (2025). Revolutionizing Rigid Pavements Towards Magnetizable Concrete Materials for Charging Electric Vehicles. Journal of Building Materials and Structures, 12(1), 49-62. https://doi.org/10.34118/jbms.v12i1.4139
Section
Original Articles