Use of bottom ash as part replacement of sand for making concrete blocks
Abstract
Coal-based thermal power plants all over the world facing serious problems of handling and disposal of the ash produced. The productive use of coal Bottom Ash (BA) is the best way to alleviate the problems associated with its disposal. This paper covers the studies on laboratory scale evaluation of vibro compaction concrete blocks using BA I, BA II & BA III collected from three different location of Coal Fed Thermal Power Station. In the present investigation laboratory investigation have been carried to utilize BA as part replacement of sand in concrete. This study cover manufacture of concrete blocks without flyash & with BA using for making solid block as per specification laid down in IS:2185 using vibro compaction machine. Three different sources of BA were used in concrete mix each @ 30%, 40% & 50% replacement by weight of sand were adopted in making concrete blocks. Comparative study of compressive strength of concrete at different age of curing, wet density, drying shrinkage is reported in this study. Wet density is found to be lower in blocks containing BA & dry shrinkage values are found well within the limits of specifications. Concrete Blocks having BA @ 30% by weight of sand are found suitable for use in the manufacture of concrete blocks.
References
Abeykoon, A. J. M. S. S., Anthony, C. S. K. R., & De Silva, G. H. M. J. S. (2012). Bottom ash as replacement of sand for manufacturing masonry blocks, Conference, Sri Lanka.
Aggarwal P., Aggarwal Y., & Gupta S.M. (2007). Effect of Bottom Ash as Replacement of Fine Aggregates in Concrete. Asian Journal of Civil Engineering (Building and Housing), 8(1), 49-62.
Aydin, E., & Arel, H. Ş. (2017). Characterization of high-volume fly-ash cement pastes for sustainable construction applications. Construction and Building Materials, 157, 96-107.
Bai Y., & Barheer P A M. (2001). Influence of Furnace Ash on Workability, Compressive Strength and Durability of Concrete. Seventh CANMET/ACI International Conference on Fly Ash, Silica Fume, Slug and Natural Pozzolana in Concrete, Chennai (Madras), India.
Cheriaf, M., Rocha, J. C., & Pera, J. (1999). Pozzolanic properties of pulverized coal combustion bottom ash. Cement and concrete research, 29(9), 1387-1391.
Ghafoori, N. (1992). Utilisation of Type C Bottom Ash in Cement Based Concrete Mixtures. Annual Report, Material Technology Center, Southern Illinois University at Carbondale, 55-76.
Ghafoori, N., & Cai, Y. (1998). Laboratory Made Roller Compacted Concretes Containing Dry Bottom Ash: Part I – Mechanical Properties. ACI Materials Journal, 95 (2), 121-130
Kurda, R., Silvestre, J. D., & de Brito, J. (2018). Toxicity and environmental and economic performance of fly ash and recycled concrete aggregates use in concrete: A review. Heliyon, 4(4), e00611.
Oruji, S., Brake, N. A., Nalluri, L., & Guduru, R. K. (2017). Strength activity and microstructure of blended ultra-fine coal bottom ash-cement mortar. Construction and Building Materials, 153, 317-326.
Purushothaman, M., & Senthamarai, R. M. (2013). Strength properties of high performance concrete using bottom ash as fine aggregate. International Journal of Civil, 2(3), 35-40.
Remya Raju, M. M. P., & Aboobacker, K. A. (2014). Strength performance of concrete using bottom ash as fine aggregate. International Journal of Research in Engineering & Technology, 2(9), 111-122.
Syahrul, M. S. H. M., Muftah, F., & Muda, Z. (2010). The properties of special concrete using washed bottom ash (WBA) as partial sand replacement. International Journal of Sustainable Construction Engineering and Technology, 1(2), 65-76.
Tang, P., Yu, Q. L., Yu, R., & Brouwers, H. J. H. (2013, October). The application of MSWI bottom ash fines in high performance concrete. In Proceedings of the 1st International Conference on the Chemistry of Construction Materials, Berlin, Germany, pp. 435-438.
Copyright (c) 2021 Journal of Building Materials and Structures
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.